强度/刚度,strength / stiffness
1)strength / stiffness强度/刚度
2)stiffness and strength刚强度
1.In this paper,the FEA method ofstiffness and strength of turbine butterfly valve is introduced, they are include single model,combinatorial model and forces calculation of sole plates bolts.介绍了水轮机蝶阀刚强度计算的有限元模型化方法，包括独立的模型和组合模型的求解方法以及地脚和基础的受力分析方法。
英文短句/例句
1.Finite Element Analysis on Stiffness and Strength of a Radar Revolver Shelter某雷达转台方舱刚强度的有限元分析
2.Modeling and Strength Analysis of Unpowered Flat Bed Trailer无动力平板拖车的建模与刚强度分析
3.The Rigidity and Strength Analysis on Hydraulic Turbine Runner of the Three Gorges Power Station(Right Bank)三峡电站(右岸)水轮机转轮刚强度分析
4.The results show that the stress intensity and stiffness are enough.结果表明，刚架结构的强度和刚度是足够的。
5.Static and Stiff Analysis of Structural Parts Based on COSMOS/Works基于COSMOS/Works的构件静强度与刚度分析
6.The Effect of Transverse Cracks on Rigidity and Strength of CRCP Pavement;横向裂缝对CRCP路面刚度和强度的影响
7.Analysis on Intensity and Stiffness of Frame Based on ANSYS;基于ANSYS的车架强度和刚度分析
8.Strength and Rigidity Analysis of the Frame of LG670 Compact ExcavatorLG670小型挖掘机结构强度刚度分析
9.FEM analysis on intensity and rigidity of cross-roll straightener frame斜辊矫直机机架强度刚度有限元分析
10.Finite element analysis about the intensity and the stiffness of the elliptical manhole椭圆形人孔强度和刚度的有限元分析
11.Stiffness and Strength Criteria for Design of Buckling-Restrained Braces屈曲约束支撑设计的刚度与强度准则
12.Research for the Seismic Behavior of the Structural System with Limited Stiffness Outrigger and with Rigid Outrigger;有限刚度加强层和刚性加强层结构体系的抗震性能研究
13.The rigidity of the metal caused it to crack.这金属因刚度强而产生裂纹.
14.Solids have rigidity, fixfed shape, and mechanical strength.固体具有刚性、一定的形状和机械强度。
15.Analysis of stress and stiffness of the treadling force measurement device by F.E.M.;运动员脚蹬力测定装置的强、刚度分析
16.Influence of diamond concentration,grit size and hardness on the performance of diamond saw blade金刚石浓度、粒度和强度对锯片切割性能的影响
17.Rational stiffness of outriggers in high-rise structure with strengthened stories带加强层高层建筑中加强层刚度的合理取值
18.3D Finite Element Analysis of Stiffness and strength of Main Bearing Cap of Internal combustion Engine内燃机主轴承盖强度和刚度的三维有限元分析
相关短句/例句
stiffness and strength刚强度
1.In this paper,the FEA method ofstiffness and strength of turbine butterfly valve is introduced, they are include single model,combinatorial model and forces calculation of sole plates bolts.介绍了水轮机蝶阀刚强度计算的有限元模型化方法，包括独立的模型和组合模型的求解方法以及地脚和基础的受力分析方法。
3)rigidity/strength刚强度
1.Three Dimensional Finite Element Rigidity/Strength and Vibration Characteristics Analysis of Blade of Hydrodynamic Turbine;水轮机叶片三维有限元刚强度与振动特性研究
2.With finite-element method,rigidity/strength analysis of the blades of axial flow hydraulic turbine is conducted by loading the force on the blade surface of model.本文采用雷诺时均的N-S方程和k-ε紊流模型,采用有限体积法和非结构化网格,对转轮区域内的流体运动进行数值模拟,获取叶片表面的受力信息,得到反映真实情况的叶片表面应力分布;将此应力分布加载至刚强度分析的叶片模型表面,采用有限元方法应力计算,实现了轴流式水轮机转轮叶片的刚强度分析。
4)strain hardening stifness强化刚度
5)strength and rigidity强度和刚度
1.Thestrength and rigidity charicteristics under horizontal insert and vertical lift working conditions are analysed,based on these,the arm sensitivity was analysed by using Monte Carlo simulations.为了研究动臂在偏载情形下的作业可靠度,建立了轮式装载机931A-C动臂的有限元计算模型,在静载水平插入和垂直掘起工况下对动臂进行了强度和刚度分析,在此基础上,应用蒙特卡洛法对其进行了灵敏度分析。
2.The restriction,loading position and loading pattern of the model are determined by the accurate division of the grillwork,and thestrength and rigidity of the roll under practical operation condition are analyzed to confirm the maximal stress place and distortion trend of the press roll,wh.根据有限单元法理论,应用AUTOCAD建立了特征造型的纸机压榨辊实体模型,并应用ANSYS有限元分析软件,建立了该压榨辊的有限元模型,进行了精确的网格划分,确定了模型的约束和加载的位置及形式,对实际工况下的压榨辊进行了强度和刚度分析,确定出压榨辊工作过程中的最大应力部位及变形趋势,可为设计纸机压榨辊提供重要依据。
6)strength and stiffness强度与刚度
延伸阅读
刚强（性格、意志）坚强，不怕困难或不屈服于恶势力：～不屈。
