轴向表面裂纹,axial surface crack
1)axial surface crack轴向表面裂纹
英文短句/例句
1.FRACTURE AND RELIABILITY ASSESSMENT ON SUBMARINE PIPELINES WITH AXIAL SURFACE CRACKS带轴向表面裂纹海洋管道的断裂计算与可靠性评估
2.Elastic-Plastic Finite Element Analysis for Piping Elbow with Axial Inside Surface Cracks;光滑弯管沿轴向内表面裂纹弹塑性有限元分析
3.Elastic-Plastic Fracture Analysis for Internal Axial Surface Half Elliptical Cracks in Oil & Gas Pipeline油气管道内部轴向表面半椭圆裂纹弹塑性断裂分析
4.The Experimental Analysis of the Correction Factor of the SIF for the Transverse Surface Semi-Elliptic Crack of a Axle轴表面横向半椭圆裂纹应力强度因子修正系数的实验分析
5.Cracks grow in directions nearly parrallel to the surface.裂纹在近乎平行于表面的方向上生长。
6.Analyses of cause for transverse cracks on CC slab surface连铸板坯表面横向裂纹产生原因分析
7.Elastic-Plastic Finite Element Analysis for Circumferential Part-Throughwall Cracks on Mitered Elbow;斜接弯管环向内表面裂纹弹塑性有限元分析
8.Elastic-Plastic Finite Element Analysis for Piping Elbow with Circumferential Part-Throughwall Cracks;含内表面环向裂纹光滑管弹塑性有限元分析
9.FINITE ELEMENT RESEARCH ON STRESS INTENSITY FACTORS AT THE FRONT OF SURFACE CRACK OF HOLLOW AXLES空心车轴表面裂纹前缘应力强度因子的有限元研究
10.Analysis of Fundamental Frequencies of Rotating Shafts with Transverse Crack;含横向裂纹的转动轴的振动基频分析
11.Analysis on Performance of Axial Throughwall Crack Pipeline Repaired by Sleeve轴向穿透裂纹管道套管修复性能研究
12.Analysis on the vibration characteristics of cracked beams subjected to axial force轴向压力影响下裂纹梁振动特性分析
13.Growing Crack Tip-fields on Anisotropic Bimaterial Interface各向异性双材料界面裂纹扩展裂尖场
14.ON THE FORMATION MECHANISM OF INTERNAL AND SURFACE CRACKS OF CONTINUOUSLY CAST SIABS连铸板坯内部裂纹和表面裂纹的形成机理
15.Failure Pressure Analysis of SG Tube with Axial Crack蒸汽发生器含轴向裂纹传热管的失效压力分析
16.Influence of transverse crack model on shafting"s torsional shear stress轴系横向裂纹模型对其扭转剪应力的影响
17.No stress measurements or crack surface samples were available for examination, only the surface crack configuration.没有应力测量或裂纹表面取样可用于检验，只能依据表面裂纹图形。
18.The problem of an elastic plane having symmetric parabolic crack is discussed.研究含轴对称抛物线曲裂纹平面弹性问题.
相关短句/例句
surface axial crack表面轴向裂纹
1.And it can be turned into surface circumferential crack andsurface axial crack.套管裂纹缺陷中最危险的是表面裂纹,可分解成表面周向裂纹和表面轴向裂纹问题。
3)surface circumferential crack表面周向裂纹
1.And it can be turned intosurface circumferential crack and surface axial crack.套管裂纹缺陷中最危险的是表面裂纹,可分解成表面周向裂纹和表面轴向裂纹问题。
4)circumferential annular crack表面环向裂纹
1.A finite element model ofcircumferential annular cracks in piping elbow has been built.应用大型通用有限元分析软件Ansys,建立含内表面环向裂纹的光滑弯管在内压作用下的模型,计算出不同裂纹尺寸的应力强度因子和形状因子,绘制曲线并进行分析,其结果可供工程安全评定使用。
5)the circumferentially part-through wall cracked pipes周向表面裂纹管
1.Through the 3-D elastic-plastic FEM analysis, the plastic collapse failure ofthe circumferentially part-through wall cracked pipes used in the petrochemical industry was studied in this paper, and it was concluded that the local collapse of ligament always occurred before the net section collapse.采用三维弹塑性有限元分析方法 ,探索了石油化工行业周向表面裂纹管的塑性垮塌失效特征 ,结果表明 :周向表面裂纹管在发生净截面塑性垮塌前将发生裂纹前沿韧带的局部塑性垮塌。
6)circumferential surface crack环向表面裂纹
1.In this paper, the wave propagation characteristics of infinite cylindrical shells withcircumferential surface crack are investigated.研究了振动波在含有环向表面裂纹的无限长圆柱壳中的传播特性。
延伸阅读
表面裂纹分子式：CAS号：性质：指暴露在容器或构件表面的裂纹，通常以半椭圆形为代表，其中长轴表示裂纹长度，半短轴代表裂纹深度。
