2000字范文,分享全网优秀范文,学习好帮手!
2000字范文 > 表面网状裂纹 surface network cracks英语短句 例句大全

表面网状裂纹 surface network cracks英语短句 例句大全

时间:2021-06-05 00:12:50

相关推荐

表面网状裂纹 surface network cracks英语短句 例句大全

表面网状裂纹,surface network cracks

1)surface network cracks表面网状裂纹

1.Thesurface network cracks are obviously intergranular located at the boundaries of abnormally large prior-austenite grains.在大方坯连铸中,经常出现的缺陷是表面网状裂纹。

英文短句/例句

1.Surface Network Cracks in Low Carbon Boron Steel Casting低碳硼合金钢表面网状裂纹成因分析

2.ANALYSIS ABOUT NET-SHAPE CRACKS ON THE SURFACE OF A350 LF6 CONTINUOUS CASTING BILLETA350 LF6连铸坯表面网状裂纹分析

3.To cause(china, for example) to become covered with a network of fine cracks.使(瓷器等)表面出现网状的细裂纹

4.glazed china with a network of fine cracks on the surface.表面有网状裂纹的光滑的瓷器。

5.A network of fine cracks on the surface of glazed pottery, china, or glassware.裂纹上釉的陶器、瓷器或玻璃制品表面上的网状细裂纹

6.Close study of the surface of the picture shows up a network of fine cracks.仔细察看画面,就会发现网状的细裂纹。

7.Investigation on Surface Star-Like Crack of Q460C BilletsQ460C钢表面星状裂纹产生原因探析

8.develop a fine network of cracks.形成一个网状的裂纹。

9.A Superposition Finite Element Mesh Method(s-FEM) and Its Application to Two Identical Coplanar Three-dimensional Surface Cracks基于有限元重合网格法的等大共面的三维表面裂纹交互因子研究

10.ON THE FORMATION MECHANISM OF INTERNAL AND SURFACE CRACKS OF CONTINUOUSLY CAST SIABS连铸板坯内部裂纹和表面裂纹的形成机理

11.Application of Steel Balls" Surface Crack Detection Based on Digital Signal Processing and Neural Net数字信号处理与神经网络在钢球表面裂纹检测中的应用

12.Opening-closing state analysis on rail surface cracks under rolling-contact loading滚动接触载荷作用下的铁轨表面裂纹开合状态分析

13.No stress measurements or crack surface samples were available for examination, only the surface crack configuration.没有应力测量或裂纹表面取样可用于检验,只能依据表面裂纹图形。

14.to become, or to cause to become, covered with a network of small cracks; The blazing sun crackled the desert sand.变得或引起覆盖上网状的小裂纹。

15.Cracks grow in directions nearly parrallel to the surface.裂纹在近乎平行于表面的方向上生长。

16.A core was removed from this area so that the crack surfaces could be examined.从这一区域取样芯,以便检验裂纹表面。

17.BEM Analysis of Transient Response in Surface Crack Problems表面裂纹问题瞬态响应的边界元分析

18.The Remaining Strength Assessment of Pipeline Containing 360°Cir- cumferential Surface Crack,含360°表面裂纹管道剩余强度评价

相关短句/例句

surface checking表面起网状裂纹

3)network cracks网状裂纹

1.The results of microscope,SEM,TEM and EDS revealed that the particles precipitated in the pre- austenite grain boundaries will result innetwork cracks under sufficient stress such as thermal stress,bending and straightening stress due to uneven cooling of strand surface.采用金相显微镜、SEM、TEM和EDS等方法,分析了因连铸板坯表面冷却不均匀引起γ→α反复相变导致碳氮化物在晶界析出,并在外力(热应力、弯曲矫直应力等)作用下产生沿晶界开裂的网状裂纹的形成机理,以及钢中[C]、Mn/S、[Al]、[V]、连铸冷却强度等对连铸板坯网状裂纹的形成和扩展的影响。

2.For the surfacenetwork cracks in 200mm thickness slabs for pipeline and veicle frame,it is found that the carbon content,Mn/S ratio and Al,Ti,V,Nb alloy additions and continuous caster conditions are attributa- ble to the formation and propagation of surface and subsurfacenetwork cracks.统计分析了攀钢所产管线钢、梁板钢等200mm×1300mm连铸坯表层网状裂纹的影响因素;发现钢中碳、锰硫比、合金元素(Al,Ti,V)、连铸机设备和浇注状况对其形成和扩展都有重要影响。

3.For the surfacenetwork cracks in 200mm thickness slabs for pipeline and vehicle frame, it is found that the carbon content,Mn/S ratio and Al,Ti,V,Nb alloy additions and continuous caster conditions are attributable to the formation and propagation of surface and subsurfacenetwork cracks.针对攀钢生产的管线钢、梁板钢等200×1300mm~2连铸坯表层出现网状裂纹,对其影响因素进行统计分析,发现钢中C、Mn/S 比和 Al、Ti、V、Nb 等合金元素及连铸机设备和浇注状况对连铸坯表层网状裂纹的形成和扩展都有重要影响。

4)surface crack表面裂纹

1.Preventive tosurface crack of MB15 magnesium alloy Φ482 mm ingot;MB15镁合金Φ482mm铸锭表面裂纹的预防措施

2.Surface Cracks in TP2 Copper Tube Billets in Horizontal Continuous Casting;TP2铜管坯水平连铸表面裂纹研究

3.An Analysis on Surface Cracks Formation of H Beam of Nb-V Microalloying Steel BS55C;Nb-V微合金化H型钢BS55C表面裂纹成因分析

5)surface flaw表面裂纹

1.Thesurface flaws of different sizes were introduced into SiC/BN laminated ceramics by Vickers indentation method.采用压痕法在SiC/BN层状陶瓷试样的表面引入不同尺寸的表面裂纹,利用三点弯曲测量含裂纹试样的极限断裂应力,研究了不同尺寸的表面裂纹对层状陶瓷断裂强度的影响;根据压痕载荷-强度实验结果,测定层状陶瓷的阻力曲线,并与单相SiC陶瓷对比。

6)Surface cracks表面裂纹

1.Analysis of reasons for surface cracks of 42CrMo spindle;42CrMo主轴表面裂纹形成原因的分析

2.The cause of surface cracks of the propylene spherical tank was analyzed comprehensively.分析了球罐产生表面裂纹的原因 ,选择合适修复方案 ,对该球罐进行了修复。

3.Surface cracks have a very complicated stress state To give the safety of device with cracks is very difficult by normal method of stress analysis This article makes a crack adjudhement with the code of CVDA-84 to the surface cracks in the balled vessel which was inspected in 199依据CADA-84对云南沾益化肥厂3#液氨球罐1996年5月检验出的表面裂纹作出了缺陷评定

延伸阅读

表面表面指人体或器官的外面或空腔的内面。

本内容不代表本网观点和政治立场,如有侵犯你的权益请联系我们处理。
网友评论
网友评论仅供其表达个人看法,并不表明网站立场。