冷却倍率,cooling times rate
1)cooling times rate冷却倍率
1.The paper analyzed the relation between cooling volume of circulating water and entry temperature of circulating water in view ofcooling times rate and enthalpy drop,and proved theoretically feasibility of the conception——that inner circulating water cooling system is stopped and only riverside circulating water cooling system is used in winter and spring,then put the conception to practice.从冷却倍率、焓降两个方面对循环水冷却水量与循环水进口温度之间的变化关系进行分析， 从理论上证明了在冬、春两季将内循环水冷却系统退出停运而只投入江边循环水冷却系统这一设想的可行性， 并将此设想付诸实践。
2)cooling water-distillate ratio冷却水倍率
3)circulating ratio冷却倍率，循环倍率
4)cooling water multiple冷却倍数
5)cooling rate冷却速率
1.Quantitative relationship between secondary dendrite arm spacing and solidificationcooling rate of AZ31 magnesium alloy;AZ31镁合金的凝固冷却速率与二次枝晶间距的定量关系
2.A simple model for calculation of thermal sprayed splatcooling rate;一种计算热喷涂层片冷却速率的简单模型
3.A new approach to evaluatecooling rates of melt droplets in close-coupled gas atomization;一种表征紧耦合气雾化中熔滴冷却速率的新方法
英文短句/例句
1.Relationship of Cooling Rate and Grain Sizes in ZL205A Alloy;ZL205A合金冷却速率与晶粒度的关系
2.Effects of Cooling Rate on Solidification Structure of Zn-3.5Mg Alloy冷却速率对Zn-3.5Mg合金凝固组织的影响
3.The cooling rate and denudation rate decreased overall from north to south.总体上自北而南,剥蚀速率和冷却速率均逐渐变小。
4.Determination of Metallographic Cooling Rate of Meteorites and Study of Thermal History of Their Parent Bodies陨石金相冷却速率测定及母体热历史研究
5.Effect of Cooling Rate on Quality of Solder Joints in Lead-Free Reflow Soldering;无铅回流焊冷却速率对焊点质量的影响
6.Effect of Cooling Rate on Phase Transformation Process and Microstructure of T91 Ferritic Heat Resistant Steel冷却速率对T91钢相变过程及组织的影响
7.Effect of cooling rate on solidification structure in high temperature brittle zone of 1Cr18Ni9Ti steel冷却速率对1Cr18Ni9Ti钢高温脆性区凝固组织的影响
8.Influence of Cooling Rate on Precipitated Phase of Super Duplex Stainless Steel冷却速率对00Cr25Ni7Mo4N超级双相不锈钢析出相的影响
9.In cumulus convection ascent rates of several metres a second give a cooling rate of a few degrees per minute.在积云中，每秒几米的对流上升速度造成的冷却速率为每分钟几度。
10.The transformed ferrite volume fraction increases and grain size decreases with the increase of cooling rate.随着冷却速率的增加,铁素体体积分数减少,晶粒尺寸变细。
11.The Effect of Cooling Rate on Magnesium Alloy"s Microstructure and Properties;冷却速率对镁合金显微组织以及力学性能的影响
12.Effect of Cooling Rates after Hot Deformation on Microstructure of Vanadium-nitrogen Non-quenched and Tempered Steel热变形后冷却速率对钒氮非调质钢显微组织的影响
13.EFFECT OF COOLING RATE ON γ" PRECIPITATE OF DZ4125 ALLOY UNDER HIGH THERMAL GRADIENT DIRECTIONAL SOLIDIFICATION高温度梯度定向凝固冷却速率对DZ4125合金γ′相的影响
14.Effect of Deformation Temperature and Cooling Rate on Grain Size Refining of Medium-Carbon Nb-Bearing Steel变形温度与冷却速率对含Nb中碳钢晶粒细化的影响
15.Oil refrigeration power required (approx.)油冷却功率(大约)
16.Water Conductivity Control of Water Cooling System in PET CyclotronPET回旋加速器水冷却系统水电导率的控制
17.Numerical simulation and design of cooling system for low-power accelerating tube低功率加速管冷却系统的数值仿真设计
18.Research of relation between air conditioning cooling water conductivity and iron corrosion velocity空调冷却水电导率与金属铁腐蚀速率关系的研究
相关短句/例句
cooling water-distillate ratio冷却水倍率
3)circulating ratio冷却倍率，循环倍率
4)cooling water multiple冷却倍数
5)cooling rate冷却速率
1.Quantitative relationship between secondary dendrite arm spacing and solidificationcooling rate of AZ31 magnesium alloy;AZ31镁合金的凝固冷却速率与二次枝晶间距的定量关系
2.A simple model for calculation of thermal sprayed splatcooling rate;一种计算热喷涂层片冷却速率的简单模型
3.A new approach to evaluatecooling rates of melt droplets in close-coupled gas atomization;一种表征紧耦合气雾化中熔滴冷却速率的新方法
6)cooling efficiency冷却效率
1.Influence of aerodynamic parameter on the temperature gradient andcooling efficiency for effusion wall cooling method;多斜孔冷却方式气动参数对壁温梯度和冷却效率的影响
2.Experimental study ofcooling efficiency of film cooling with tab;突片作用下气膜冷却效率的试验研究
3.Investigation of the wall temperature distribution andcooling efficiency for impingement/effusion cooling scheme;冲击/发散冷却壁温分布和冷却效率研究
延伸阅读
倍率望远镜、显微镜的物镜焦距和目镜焦距的比值，比值越大，放大的倍数越大。
