筋条-蒙皮结构,skin-to-stiffener structure
1)skin-to-stiffener structure筋条-蒙皮结构
1.The interfacial fracture process of stitched/non-stitched composite L-shapedskin-to-stiffener structures under pull-off load was simulated using self-defined suture model and Cohesive element method.用自定义的缝线模型和Cohesive单元方法,模拟了复合材料非缝合/缝合胶接L型筋条-蒙皮结构胶接界面在拉脱载荷作用下的失效过程;分析了第一排缝线位置和筋条突缘宽度对界面强度的影响。
2)structural skin结构蒙皮
英文短句/例句
1.Theoretical and Experimental Research on the Stressed Skin Diaphragm of Light-gauge Steel Structures;轻钢结构蒙皮效应的理论与试验研究
2.The Analysis and Application of Diaphragm Effect in Light Steel Structure轻型钢结构蒙皮效应的分析与工程应用
3.Study of the Skin Structure and Apoptosis of Mongolia Sheep蒙古绵羊皮肤组织结构与细胞凋亡的研究
4.Stressed Skin Diaphragm Effect of Portal Frame Structure;蒙皮效应对于门式刚架结构性能影响研究
5.The Deformation Analysis of the Diaphragm Effect on the Panel of the Lightweight Steel Construction;轻型房屋钢结构压型钢板蒙皮效应的变形分析
6.Research on New Type of Light-gauge Steel Structure Based on Cover Surface s Panels;轻钢龙骨体系基于蒙皮大板结构分析方法研究
7.Finite Element Simulation Analysis on Stressed Skin Diaphragm of Light-weight Steel Structures;轻钢结构受力蒙皮作用的有限元模拟分析
8.Mechanics Performance Study of Light Steel Structure with Skin Diaphragms;蒙皮效应对轻钢结构力学性能的影响研究
9.Research on Considering Stressed Skin"s Effect on the Mechanical Properties of Light Gauge Steel Structure考虑蒙皮效应影响的轻钢结构力学性能的研究
10.Cost-weight optimization design of composite stiffened panel复合材料蒙皮加筋壁板结构成本-质量优化设计
11.Space Unitary Performance of Stressed Skin Structure with Openings Loaded Horizontally;水平荷载作用下开洞蒙皮结构空间整体性能研究
12.Finite Element Simulation Analysis and Design Method of Stressed Skin Diaphragm in Light Gauge Steel Structure;轻钢结构应力蒙皮效应的有限元模拟分析和设计方法
13.Simulation Analysis and Research of Stressed Skin Structure Loaded Horizontally on the Top of the Columns;柱顶水平荷载作用下受力蒙皮结构模拟分析研究
14.Low-modulus skin is an effective design method for improving damage tolerance behavior of composite structures.低模量蒙皮设计概念是改进复合材料结构损伤容限特性的一种有效的设计方法。
15.It not only improves damage tolerance behavior of composite structures, but also improves crack propagation properties of impact.它不仅可用于改善结构在拉伸、切载荷下的损伤容限特性,同时也可提高蒙皮的抗冲击损伤特性。
16.Equivalent FE model for sheet stretch forming over reconfigurable compliant tooling可重构柔性模具蒙皮拉形有限元等效模型
17.Development of forming simulation system for sheet draping over reconfigurable compliant tooling可重构柔性模具蒙皮包覆拉形仿真系统开发
18.Application of welded wire fabric to flexural members reinforced with high strength bars蒙皮钢筋在高强钢筋混凝土受弯构件中的应用
相关短句/例句
structural skin结构蒙皮
3)welded wire fabric蒙皮钢筋
1.Application ofwelded wire fabric to flexural members reinforced with high strength bars蒙皮钢筋在高强钢筋混凝土受弯构件中的应用
2.The bending capacity and crack width at service loads were analyzed,and the bending capacity,deformation and crack width of two groups of the members withwelded wire fabric near the concrete surface were compared.分析了采用500 MPa钢筋的混凝土构件的正截面受弯承载力及使用阶段的裂缝宽度,同时对其中两组配有蒙皮钢筋的梁进行受弯承载力、变形及裂缝宽度的对比分析。
4)skin-to-stiffener加筋蒙皮
1.In order to validate its enhancement effect comparing to traditional bond structures,two groups of stitched/non-stitched composite T-shaped and L-shapedskin-to-stiffener performs were designed,and check experiment on the strength of non-stitched/stitchedskin-to-stiffener structures,loaded in tensile pull-off,was performed.为了验证其相比于传统胶接强度的提高程度,研究设计了复合材料缝合与非缝合T型和L型加筋蒙皮试验件和试验夹具,进行了拉脱破坏强度的对比试验,结果表明缝合后的L型试件平均强度提高了93。
5)stress diaphragm应力蒙皮结构
1.Through the primary property of glued-laminated timber,it discusses structure style of glued-laminated residence,with glued-laminated team-and-column frame,and brings forward that lateral load resisting system can be designed as shear wall andstress diaphragm,it makes the simple introduction to it to supply reference to wooden structure workers.结合胶合木的主要特点,探讨了以胶合梁和胶合柱为主要受力构件的胶合木结构住宅的结构形式,提出了对胶合木结构侧向受力系统采取剪力墙和应力蒙皮结构的概念设计法,并做了简单介绍,以供木结构工作者参考。
6)Frame-covering structures骨架-蒙皮结构
延伸阅读
筋条1.身体结实强健。
