碳化钼,molybdenum carbide
1)molybdenum carbide碳化钼
1.An investigation on the hydrodenitrogenation performance ofmolybdenum carbide catalyst;碳化钼催化剂加氢脱氮性能研究
2.Study on n-heptane isomerization on β zeolite supportedmolybdenum carbide catalyst;正庚烷在β沸石负载碳化钼催化剂上的异构化研究
3.Preparation ofmolybdenum carbide catalyst and its hydrodesulfurization performance for thiophene;碳化钼催化剂的制备及噻吩加氢脱硫性能
英文短句/例句
1.Preparation and Performance of RE Molybdenum Carbide and Molybdenum Carbide;稀土碳化钼和碳化钼的制备及其性能
2.Synthesis and catalytic properties of carbon nanoparticles supported molybdenum carbide纳米碳颗粒负载碳化钼复合物的制备及其催化性能研究
3.Charaterization and Pyridine Hydrodenitrogenation Performance of Molybdenum Carbide;碳化钼的表征和吡啶加氢脱氮性能研究
4.Preparation of Rare Earth Molybdenum Carbide by Rare Earth Co-Permeation and Its Conductivity稀土多元渗法制备稀土碳化钼及其导电性
5.Synthesis, Charaterization and Quinoline Hydrodenitrogenation Performance of Molybdenum Carbide碳化钼的合成表征与喹啉加氢脱氮性能研究
6.Preparation and Catalytic Properties of Molybdenum Carbide and Nickel Phosphide Assembled in Mesoporous Molecular Seives介孔分子筛组装碳化钼和磷化镍催化剂的制备及其催化性能研究
7.Isomerization of n-Hexane on the Modification β-Zeolite Supported Molybdenum Carbide Catalyst改性β沸石负载碳化钼催化剂上正己烷的异构化
8.Studies on Surported Molybdenum Carbide Catalysts: Preparation, Characterization and Selective Hydrogenation;负载型碳化钼催化剂的制备、表征和选择加氢反应性能的研究
9.Preparation of Molybdenum Carbide Catalyst and Its Hydrodesulf Urization Performance for Dibenzothiophene碳化钼催化剂的制备及二苯并噻吩加氢脱硫性能
10.Preparation and Mechanism Analysis of Molybdenum Carbide-Based Catalyst for Fuel Cell Cathode Reaction基于碳化钼的燃料电池阴极催化剂的制备及其作用机理
11.Morphology and Formation Mechanism of Bainite Carbide of High Carbon Chromium-Molybdenum Steel高碳铬钼钢贝氏体碳化物形貌及形成机理
12.Potassium doped Fe-Mo bimetallic carbide catalysts for higher alcohols synthesis from syngas钾改性铁钼碳化物催化剂及其CO加氢性能
13.Methods for chemical analysis of ferromolybdenum--The coulometric method for the determination of carbon contentGB/T5059.8-1988钼铁化学分析方法库仑法测定碳量
14.PURIFICATION OF ADU AND HIGH-MOLYBDENUM AUC BY RECRYCTALLIZATION用重结晶法纯化重铀酸铵和高钼三碳酸铀酰铵
15.Zn, Al, Cu, Mo, Pb, carbon steel, stainless steel, Alumina, Babbitt and so on.锌、铝、铜、钼、铅、碳钢、不锈钢、氧化铝、巴氏合金等。
16.Study on Higher Alcohols Synthesis over Sulfur-tolerant Mo-based Catalysts in Slurry Reactor;耐硫钼基催化剂浆态床合成低碳醇的研究
17.Application of Keggin type molybdovanadophosphoric compounds in synthesis of diphenyl carbonate by oxidative carbonylation with phenolKeggin型磷钼矾杂多化合物在氧化羰基化合成碳酸二苯酯中的应用
18.Study on pressured CO shift reaction kinetics on cobalt-molybdenum series catalysts钴钼系催化剂一氧化碳加压变换反应动力学研究
相关短句/例句
molybdenum(tungsten)carbide碳化钼(钨)
3)molybdenum carbide碳化钼<冶>
4)molybdenum carbonitride碳氮化钼
1.The as-prepared product was characterized by x-ray diffraction(XRD),x-ray photoelectron spectroscopy(XPS),low-temperature nitrogen adsorption and elemental analyzer,and confirmed that it was a mixture of molybdenum carbide(β-Mo2C) andmolybdenum carbonitride(Mo2CxNy).采用X射线衍射(XRD)、X射线光电子能谱(XPS)、低温氮吸附、元素分析等方法对催化剂进行了表征,发现碳氮夹杂钼基催化剂实为碳化钼(β-Mo2C)与碳氮化钼(Mo2CxNy)的混合物。
5)rare earth Molybdenum carbide稀土碳化钼
6)molybdenum carbide ceramics碳化钼陶瓷
延伸阅读
碳化钼陶瓷分子式:CAS号:性质:钼与碳的化合物为主要成分的陶瓷。主要有两类。(1)以碳化二钼(Mo2C)为主晶相的陶瓷。呈暗灰色。理论密度9.2g/cm3。熔点2690℃。莫氏硬度7。显微硬度1800kg/mm3(负荷50g)。弹性模量22100kg/mm2。热导率6.7×106W/(m·K)。2300℃以上分解。(2)以一碳化一钼(MoC)为主晶相的陶瓷。理论密度8.88g/cm3。熔点2700℃。一般先制成碳化钼粉末(采用钼与碳直接化合法、金属氧化物与碳的还原一化合法、气相沉积法和自蔓延高温合成法),然后在真空或还原气氛下在碳管炉、钼丝炉、高频真空炉中进行烧结(多采用反应烧结、热压烧结和热等静压烧结)而制成。主要用作超硬工具材料、耐磨材料、发热体材料以及高温结构材料。