循环加载,cyclic loading
1)cyclic loading循环加载
1.Research on shear behavior of reinforced concrete beams undercyclic loading;循环加载对钢筋混凝土梁抗剪性能影响研究
2.3-D constitutive relation for rock joints duringcyclic loading;岩体结构面三维循环加载本构关系
3.Constitutive model for soils under the condition ofcyclic loading;循环加载条件下土的应力路径本构模型
英文短句/例句
1.The remaining life of speciment is dependent upon loading history, under two level cyclic loading.两级循环加载条件下，材料的剩余寿命强烈地依赖于加载历史。
2.Abstract: The remaining life of speciment is dependent upon loading history, under two level cyclic loading.文摘:两级循环加载条件下，材料的剩余寿命强烈地依赖于加载历史。
3.Constitutive Theory of Crystal Plasticity under Non-Proportional Cyclic Loading;非比例循环加载下的晶体塑性本构理论
4.Improvement of Nonlinear Constitutive Model for Rock Fractures under Normal Cyclic Loading岩体节理非线性法向循环加载本构模型的改进
5.Creep Behavior of Saturated Soft Clay Under Cyclic Loading in Undrained Condition不排水循环加载作用下饱和软粘土的蠕变特性
6.Damage Behavior of Eutectic Silicon Particles in ZL101 Aluminum Cast Alloys During Cyclic Loading循环加载下铸造铝合金中硅颗粒的破坏行为
7.Numerical analysis of ultimated bearing capacity behavior of suction caisson foundations under cyclic loading循环加载条件下吸力式沉箱基础极限承载力特性分析
8.A STUDY ON FATIGUE CRACK INITIATION AND SMALL CRACK GROWTH UNDER THE CYC LIC COMPRESSIVE LOAD CONDITION压缩循环加载下缺口裂纹的萌生与小裂纹扩展规律研究
9.A Study of the Effect of Cyclic Mechanical Loading and Artifical Saliva on the Durability of the Dentin Adhesive;循环加载及人工唾液浸泡对牙本质粘接耐久性影响的实验研究
10.An in Vitro Study: Effect of Cyclic Loading to the Fracture Resistance of Teeth Restored with Different Post and Core Systems;循环加载对不同桩核修复后牙体抗折强度影响的对比研究
11.Design and Analysis of a Specimen of Steel Composite Staggered Truss Structures;多层混合式交错桁架钢结构体系循环加载试验试件设计及分析
12.THE CONTACTING COMPUTATION METHOD FOR SIMULATING THE MODEL Ⅰ CRACK PROPAGATION PROCESS IN CONCRETE UNDER CYCLIC LOADING循环加载条件下混凝土Ⅰ型裂缝扩展模拟的接触算法
13.The Effects of Annealing Treatments on Superelastic Fatigue Behavior and Lifespan of NiTi Shape Memory Alloy under Cyclic Loading循环加载下热处理对NiTi记忆合金丝超弹性变形行为和寿命的影响
14.Microleakage between tooth canal dentin and three cements for bonding fiber posts under cyclic mechanical loading循环加载下3种黏结剂与根管牙本质间微渗漏的对比研究
15.The test study proves that the different loading systems have a great influence on the aseismic performance of the reinforced concrete column.结果表明,不同循环加载制度对钢筋混凝土柱的抗震性能有较大的影响。
16.Study of deformation of rock salt under cycling loading and unloading循环加、卸载下盐岩变形特性试验研究
17.Study on the Rock Mechanics Characteristic by Cyclic Load and Statics Load Fit Together;循环荷载与静载组合加载下岩石的力学特性试验研究
18.Experimental study of skarn under uniaxial cyclic loading and unloading test and acoustic emission characteristics矽卡岩单轴循环加卸载试验及声发射特性研究
相关短句/例句
cyclic load循环加载
1.In order to investigate and compare the ultimate load-carrying capacity,hysteretic behavior and dynamic characteristics of welded and bolted steel frames;6 single-span two-story steel frames were tested undercyclic loading.为了探讨、比较焊接和螺栓连接钢框架的极限承载能力、滞回性能及动力特性,本文进行了6榀1∶2比例的单跨双层钢框架循环加载试验和动力特性测试,其中焊接、端板螺栓连接、角钢螺栓连接钢框架各两榀。
3)cyclic mechanical loading循环加载
1.Effects ofcyclic mechanical loading on the nanoleakage within resin-dentin interfaces;循环加载对牙本质黏结界面纳米渗漏的影响
2.The effect ofcyclic mechanical loading on the microtensile bond strengths of three adhesives;循环加载对三种牙本质粘结剂微拉伸粘结强度的影响
3.Microleakage between tooth canal dentin and three cements for bonding fiber posts undercyclic mechanical loading循环加载下3种黏结剂与根管牙本质间微渗漏的对比研究
4)cycle of load application加载循环
5)dynamic cyclic load动循环加载
1.Based on the idea of using the prefabricated cracks in the sandstone samplesto simulate the actual rock mass, the failure mode and the mechanism of rocksamples with the intermittent cracks are studied by means ofdynamic cyclic load(2.0 Hz）动循环加载、静载试验和大量石膏模型试验对非贯 通（断续）裂隙砂岩样破坏模式、破坏机理进行了研究，并运用数值仿真 试验思路对裂隙砂岩样破坏过程进行了跟踪模拟；在此基础上，运用断裂 力学理论和极限平衡理论，分别建立了不同加载方式下裂隙岩体的强度理 论公式，验证了裂隙石膏样在倾角为45°时出现最小值的试验结果，反映 了裂隙试样动载下的破坏特点；首次对裂隙砂岩样在不同加载频率下的速 率效应及循环作用引起的疲劳损伤特性进行了研究；通过对浸水、冻结后 裂隙砂岩样变形、强度特性的对比，首次对低温条件下(-15℃）裂隙砂岩 样的动力特性进行了分析，发现裂隙砂岩样随加载频率的增加，动粘滞力 充分发挥和裂纹扩展、搭接速度减慢使得速率效应显著；同时发现裂隙砂 岩样在荷载往返作用下，岩样的抗剪强度值和粘滞性降低明显，初始结构 易遭到破。
6)cyclic loading and unloading循环加卸载
1.Experimental study of skarn under uniaxialcyclic loading and unloading test and acoustic emission characteristics矽卡岩单轴循环加卸载试验及声发射特性研究
2.Strength and deformation were studied on plastic concrete in different loading ways through direct andcyclic loading and unloading testing.通过塑性混凝土在单调和循环加卸载下的试验,对不同加卸载作用下塑性混凝土的强度和变形性能进行研究。
延伸阅读
高加浓铀燃料循环分子式：CAS号：性质：反应堆中使用235U加浓度>90％的铀作燃料，由于235U的临界质量小，浓缩铀燃料装量少，堆芯功率密度高。核潜艇用压水堆、利用钍的高温气冷堆和高中子通量反应堆均利用高加浓铀作燃料。高加浓铀在生产时消耗大量分离功，成本很高。乏燃料元件必须处理以回收未用完的235U。高加浓铀是核武器原料，一般不易得到，限制了高加浓铀燃料循环的应用。
