偏压,bias
1)bias[英]["ba??s][美]["ba??s]偏压
1.Effect ofbias on composition and microstructure of Zr-Si-N diffusion barrier;磁控溅射偏压对Zr-Si-N扩散阻挡层组织结构的影响
2.The Effect of Working Gas and Bias on Preparation ofFe containing Polymer Composite Films;工作气氛和偏压对含铁聚合物杂混薄膜制备的影响
3.Effect ofbias on texture growth of MPCVD diamond films;偏压对MPCVD金刚石薄膜织构生长的影响
英文短句/例句
1.biasing battery偏压电池，偏 流电池
2.biasing circuit偏压电路偏流电路偏磁电路
3.bias set circuit偏压调节电路偏流调节电路偏磁调节电路
4.fixed bias transistor circuit固定偏压晶体管电路
5.kinescope bias tracking circuit显象管偏压统调电路
6.back-biased barrier(有)反向偏压的阻挡层
7.Numerical Analysis of the Asymmetrical Pressure on a Tunnel Embedded in Geologically Bedding Strata;地质顺层偏压隧道偏压作用的数值分析
8.Synchronous Limit Deviation of Press Brake under Eccentric Compression Circumstance折弯机偏压情况下的同步极限偏差分析研究
9.No Bus Bias – The bus system has lost connection with all modules that provide bias.无母线偏压 ‐母线系统已失去与提供偏压模组的联系
10.The transformer isolates the transistors with regard to d-c bias voltage.变压器可在两个晶体管之间隔离直流偏压。
11.Researches on Behavior of Eccentrically Loaded Stub Column and Axially Compressed Slender Column with RPC-Filled Circular Steel Tube;圆钢管RPC短柱偏压及长柱轴压受力性能研究
12.slide-back vacuum tube voltmeter偏压补偿式电子管伏特计
13.hold-off rectifier直耦放大器的偏压整流器
14.Hypertension (or high Blood pressure):Condition in which Blood pressure is abnormally high.高血压:血压偏高的病症。
15.eccentrically-precompressed precast-concrete pile偏心预压混凝土预制桩
16.transformer-fed deflector coil变压器馈电偏转线圈
17.Experimental study on eccentric compression behaviour of autoclaved flyash-lime brick masonry蒸压粉煤灰砖砌体偏心受压性能试验
18.The applanation tonometer atend to underestimate the true IOP after CK.结论:CK术后压平式眼压计测量眼压值偏低。
相关短句/例句
Bias voltage偏压
1.Influence of bias voltage on morphology,phase and wear performance of magnetron sputtered CrTiAlN coatings;偏压对CrTiAlN镀层组织形貌及磨损性能的影响
2.Effect of bias voltage on morphology and performance of magnetron sputter ion plating graphite-like carbon coatings;磁控溅射离子镀基体偏压对类石墨碳膜组织形貌及性能的影响
3.Effect of bias voltage on the formation of CN_x films in hollow cathode type discharge plasma sputtering techniques;偏压对空心阴极放电等离子体溅射制备氮化碳薄膜的影响
3)unsymmetrical pressure偏压
1.Research on optimized construction procedure for double-arched tunnel inunsymmetrical pressure;偏压连拱隧道优化施工的研究
2.Numerical analysis and treatment of a collapsed middle drift for shallow multi-arch tunnel underunsymmetrical pressure;浅埋偏压连拱隧道中导洞坍方数值分析与处治
3.Construction of the super shallow buried Chang anba Tunnel exit withunsymmetrical pressure and weak surrounding rock;长安坝隧道出口特浅埋、偏压、软弱围岩段施工技术
4)eccentric compression偏压
1.Numerical method for analysis of ultimate strengthof concrete-filled square steel tubular columns undereccentric compression reinforced by inner circular steel tube;内(圆)钢管增强方钢管混凝土偏压柱极限承载力分析数值方法
2.Firstly,through tests of 8 self-compacting concrete filled steel tubular(CFST) columns undereccentric compression,the influences of eccentricity ratio and steel ratio on the behavior of columns were discussed.首先对8根钢管自密实混凝土偏压柱的力学性能进行试验,分析偏心率和含钢率等因素对受力性能的影响;其次采用模型柱法和非线性有限元法对偏压柱试验结果进行全过程分析;最后采用模型柱法对钢管混凝土偏压柱进行大量数值仿真分析,提出一种新的圆钢管混凝土偏压柱承载力实用计算公式,并将该公式及中国其他学者提出的公式的计算结果与各国309组钢管混凝土偏压柱承载力有效试验结果进行对比分析。
3.The paper introduces the difficult construction techniques such aseccentric compression,large span and shallow foundation in the entrance engineering of a multi-arch tunnel project.文章结合工程实例,重点介绍了双连拱隧道进口段"偏压、大跨、浅埋"等施工技术难题,阐述了半明洞施工的施工方案、工艺流程以及明洞"人工山体"的形成等关键施工技术,并总结了监控量测数据所取得的效果。
5)partial pressure偏压
1.Optimum analysis on the initial support structure of double-arch tunnel inpartial pressure;偏压连拱隧道初期支护结构优化研究
2.The study indicates that:1)asymmetrical excavation is the key cause ofpartial pressure in the mid-leading wall and the c.以江西某高速公路一浅埋偏压连拱隧道为背景,用MARC有限元程序对其出口段进行了动态施工的三维数值模拟。
3.Construction mechanics caused by different construction procedures under different slope angle of surface ground are analyzed based on a plain strain problem using Druck-Prager yield law in apartial pressure double-arch tunnel.基于平面应变问题,采用Druck-Prager屈服准则,研究不同地表倾角对偏压连拱隧道不同施工方法的施工力学性能的影响。
6)unsymmetrical loading偏压
1.According to the Beijing Heikou tunnel in import terminal CK0 +090 ～ +250 shallow-buriedunsymmetrical loading section during construction after the mountain body cracking appearing engineering diseases, the paper introduces the engineering environment of disease, an analysis of the causes of diseases, specific measures and methods of disease construction.根据出京河防口隧道在进口端CK0+090～+250浅埋偏压段施工期间山体开裂后出现的工程病害,概述了产生病害的工程环境,分析了病害产生的原因,介绍了病害段施工的具体工程措施和方法,总结了浅埋、偏压、破碎围岩条件下的隧道施工技术。
2.Conbining with the 2nd tunnel engineering of shizhi rock , the paper introduced construction technology of three-step method in Ⅳ , Ⅴ class rock in the shallow-buriedunsymmetrical loading large section Passenger Dedicated Line tunnel, operating points and the deformation control measures .文章结合狮公岩二号隧道工程,介绍了Ⅳ、Ⅴ级围岩中浅埋偏压大断面客运专线隧道三台阶法施工工艺,并对操作要点和变形控制措施进行了详细阐述,对同类施工有借鉴作用。
延伸阅读
压轴1.见"压胄子"。
